Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 201
In this semester-long, five class series, we continue to build on the skills learned in Metal Shop for Homeschool 101 with a focused project-based curriculum.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Introduction to Knife Forging - 3 student workshop
^^ IF CLASS IS OUT OF STOCK, CLICK ON THE LINK ABOVE TO JOIN THE WAITLIST! ^^
** LEARN HOW TO FORGE A CHEF’S KNIFE AND TAKE IT HOME**
The Intro to Knife Forging class is a two day class.
9am-5pm, both days
Lunch is provided & beers to share after class!
In this Introduction to Knife Forging, we will focus on the fundamentals of what makes a great culinary knife. From steel type and heat treat to shaping and finishing techniques, we will set the student up with the basic knowledge and hands-on learning to get started in knife making. This is a forging class. Students will hammer, grind, and finish their blade before shaping and attaching their handle. We purposely designed this class with a maximum of 3 students so that you have dedicated one-on-one time with the instructor.
This two day, 16 hour class will consist of classroom as well as shop time. The student will walk home with an 8" Chef’s knife. Lunch at noon and beers/beverages after class will be provided.
What students should have / could bring:
Work clothes (non-flammable)
No loose clothing/hair/jewelry
Closed toe shoes
Safety Glasses
Respirator/Dust mask
Water Bottle
Notepad
What students will get out of the class:
Forging Basics
Kitchen knife geometry, ergonomics, design & function
Knife grinding techniques
Knife assembly techniques
Handle shaping
Heat treating basics
Steel and wood care and upkeep
Walk home with a hand-forged kitchen knife that YOU made!
Duncan Stephenson is the owner and maker at Horn & Heel. A professional bladesmith of 9 Years with a BFA in Metal Design from East Carolina University, specializing in culinary knives. He joined The Forge Makers Community in April 2021, by way of North Carolina. Check out his stunning work here: hornandheel.com
* All materials provided
** Classes are transferable up to 7 days before this class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Metal Shop for Homeschool 201
In this semester-long, five class series, we continue to build on the skills learned in Metal Shop for Homeschool 101 with a focused project-based curriculum.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop 101 Summer School for Teens: Part 1
** This is a 4-part class. Please register for all four parts.
In this semester-long, four class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays, twice a month in June and July, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
METAL SHOP 101 SUMMER SCHOOL FOR TEENS: PART 2
** This is a 4-part class. Please register for all four parts.
In this semester-long, four class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays, twice a month in June and July, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding (Copy)
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
METAL SHOP 101 SUMMER SCHOOL FOR TEENS: PART 3
** This is a 4-part class. Please register for all four parts.
In this semester-long, four class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays, twice a month in June and July, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
METAL SHOP 101 SUMMER SCHOOL FOR TEENS: PART 4
** This is a 4-part class. Please register for all four parts.
In this semester-long, four class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays, twice a month in June and July, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 201
In this semester-long, five class series, we continue to build on the skills learned in Metal Shop for Homeschool 101 with a focused project-based curriculum.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Lamp Making in Metal: Part 2
This is a two part class. Please register for both parts.
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this metalworking class, students will learn to hand fabricate a table lamp from steel sheet metal and found objects. Learn how to use 6 different tools in The Forge Nashville Metal Shop, including the sheer, brake, iron worker, and horizontal and vertical bandsaws. We will experiment with different shade materials and learn how to safely wire basic lighting circuits. All lamps will be wired and tested to UL specifications for portable luminaries. Class size is limited to 3 students.
This class is taught by Larkin Rhinehardt, our Director of Metal Shop. Larkin’s specialty is in custom lighting and luminous sculptural installations.
* All materials for this class are included in the tuition.
** Classes are transferable up to 48 hours before class, but not refundable.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Lamp Making in Metal: Part 1
This is a two part class. Please register for both parts.
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this metalworking class, students will learn to hand fabricate a table lamp from steel sheet metal and found objects. Learn how to use 6 different tools in The Forge Nashville Metal Shop, including the sheer, brake, iron worker, and horizontal and vertical bandsaws. We will experiment with different shade materials and learn how to safely wire basic lighting circuits. All lamps will be wired and tested to UL specifications for portable luminaries. Class size is limited to 3 students.
This class is taught by Larkin Rhinehardt, our Director of Metal Shop. Larkin’s specialty is in custom lighting and luminous sculptural installations.
* All materials for this class are included in the tuition.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 201
In this semester-long, five class series, we continue to build on the skills learned in Metal Shop for Homeschool 101 with a focused project-based curriculum.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Introduction to Knife Forging - 3 student workshop
^^ IF CLASS IS OUT OF STOCK, CLICK ON THE LINK ABOVE TO JOIN THE WAITLIST! ^^
** LEARN HOW TO FORGE A CHEF’S KNIFE AND TAKE IT HOME**
The Intro to Knife Forging class is a two day class.
9am-5pm, both days
Lunch is provided & beers to share after class!
In this Introduction to Knife Forging, we will focus on the fundamentals of what makes a great culinary knife. From steel type and heat treat to shaping and finishing techniques, we will set the student up with the basic knowledge and hands-on learning to get started in knife making. This is a forging class. Students will hammer, grind, and finish their blade before shaping and attaching their handle. We purposely designed this class with a maximum of 3 students so that you have dedicated one-on-one time with the instructor.
This two day, 16 hour class will consist of classroom as well as shop time. The student will walk home with an 8" Chef’s knife. Lunch at noon and beers/beverages after class will be provided.
What students should have / could bring:
Work clothes (non-flammable)
No loose clothing/hair/jewelry
Closed toe shoes
Safety Glasses
Respirator/Dust mask
Water Bottle
Notepad
What students will get out of the class:
Forging Basics
Kitchen knife geometry, ergonomics, design & function
Knife grinding techniques
Knife assembly techniques
Handle shaping
Heat treating basics
Steel and wood care and upkeep
Walk home with a hand-forged kitchen knife that YOU made!
Duncan Stephenson is the owner and maker at Horn & Heel. A professional bladesmith of 9 Years with a BFA in Metal Design from East Carolina University, specializing in culinary knives. He joined The Forge Makers Community in April 2021, by way of North Carolina. Check out his stunning work here: hornandheel.com
* All materials provided
** Classes are transferable up to 7 days before this class, but not refundable.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Metal Shop for Homeschool 201
In this semester-long, five class series, we continue to build on the skills learned in Metal Shop for Homeschool 101 with a focused project-based curriculum.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Metal Shop for Homeschool 101
In this semester-long, five class series, we have built a really fun project-based curriculum teaching teens the basics of metal fabrication - balancing tools and materials knowledge with form and function, sculpture and kinetics.
Fridays once a month, 9am-1pm
* Tuition includes all materials
** Inquire for more details - hello@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 2
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Working: Part 1
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!
All materials, PPE will be provided, as well as some snacks and drinks!. Four students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
** Classes are transferable up to 48 hours before class, but not refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
